The predecessor of this article is TE0630-03-82I12-A.

The Trenz Electronic TE0630 are industrial-grade FPGA micromodules integrating a AMD Spartan™ 6 FPGA, a mini-USB 2.0 device port, 4 GBit (512 MByte) DDR3L SDRAM with 16-Bit width, 8 M

Cooling solution especially desgined for Trenz Electronic MPSoC module TE0813.

Important note: This heat spreader requires a so-called gapfiller. For this reason it is recommended to have the heat spr

The Trenz Electronic Starter Kit TE0817-02-7DE81-AS consists of a TE0817-02-7DE81-A module with ZU7EV on a TEBF0818-02 base board including a pre-assembled heatsink, in a black Core V1 Mini-ITX Enclosure. Supplied with a Be Quiet! 400 W power supply fo

The predecessor of this article is TEMB0005-01. All changes are in the 37,800 円(税別)

The Trenz Electronic CR00045-01-0 is a 256Mb OPI/HPI (APS256XXN-OBR-BG) memory board for CRUVI modules, compatible with CRUVI HS slots supporting 1.8V VCCIO.

For further informations please visit www.cruvi.com.<

The predecessor of this article is TE0821-01-3AE31PA. All changes are in the 72,800 円(税別)

The predecessor of this article is TE0821-01-3BI21MA. All changes are in the 87,800 円(税別)

The predecessor of this article is TE0820-05-3BI21ML. All changes are in the 86,800 円(税別)

This product is offered at a discount and is valid while stocks last!
____________________________________________________

The predecessor of this article is TE0807-02-7DI24-A. All changes

The predecessor of this article is TE0803-04-4BI21-A. All changes are in the 95,800 円(税別)

This product is offered at a discount and is valid while stocks last!
____________________________________________________

The predecessor of this article is TE0720-03-61Q86PL. All c

This product is offered at a discount and is valid while stocks last!
____________________________________________________

Note: Carrier without pads for conduction cooling!

The Trenz Electronic TEF100

The predecessor of this article is TE0817-01-7DE81-A. All changes are in the 319,800 円(税別)

この製品の前身は TEF0008-02-Dです。すべての変更は、製品変更通知 (PCN)に記載されています。Tren

The BGA Heat Sink is a 17 x 17 x 17.5 mm standard heat sink with thermal tape. It is made of aluminium with blue anodized finish.

This module is a TE0813-02-4BE81-A with mounted heat spreader.

All changes are in the Produc

The Trenz Electronic CR00240-01-A is a CRUVI Adapter for HDMI with high-speed level shifter.
For further informations please visit www.cruvi.com.

The predecessor of this article is TE0714-04-42I-7-L. All changes are in the Product Change No

The predecessor of this article is TEI0006-03-ALC13A. All changes are in the Pr

The Trenz Electronic CR00026-01-NC is a HS CRUVI module used as breakout/interposer for an other HS CRUVI module under investigation. All Signals of the HS CRUVI connetor are routed to a host HS CRUVI connector and additionally to 2.54 mm pitch pin hea

The predecessor of this article is KK0714-02. All changes are in the Prod

この製品の前身は TE0808-05-9GI81-Aです。すべての変更は、製品変更通知 (PCN)に記載されています。注:

The Trenz Electronic CR00112-01 is an FMC adapter for dual CRUVI modules with Multi-gigabit speed connectors.

For further informations please visit www.cruvi.com.

The predecessor of this article is KK0817-01. All changes are in the Product Cha

The predecessor of this article is TE0841-02-035-1I. All changes are in the Product Change N